Since DVDs are read by a laser, they are resistant to a point, to fingerprints, dust, smudges, and scratches. However, surface contaminants and scratches can cause data errors. On a video player, the effect of data errors ranges from minor video artifacts to frame skipping to complete unplayability. So it's a good idea to take care of your discs. In general treat them the same way as you would a CD.
Your player can't be harmed by a scratched or dirty disc, unless there are globs of nasty substances on it that might actually hit the lens. Still, it's best to keep your discs clean, which will also keep the inside of your player clean. Never attempt to play a cracked disc, as it could shatter and damage the player. It doesn't hurt to leave the disc in the player (even if it's paused and still spinning), but leaving it running unattended for days on end might not be a good idea.
In general, there's no need to clean the lens on your player, since the air moved by the rotating disc keeps it clean. However, if you commonly use a lens cleaning disc in your CD player, you may want to do the same with your DVD player. I recommend only using a cleaning disc designed for DVD players, since there are minor differences in lens positioning.
There is no need for periodic alignment of the pickup head. Sometimes the laser can drift out of alignment, especially after rough handling of the player, but this is not a regular maintenance item.
Care and feeding of DVDs
Handle only at the hub or outer edge. Don't touch the shiny surface with your popcorn-greasy fingers.
Store in a protective case when not in use. Do not bend the disc when taking it out of the case, and be careful not to scratch the disc when placing it in the case or in the player tray.
Make certain the disc is properly seated in the player tray before you close it.
Keep away from radiators/heaters, hot equipment surfaces, direct sunlight (near a window or in a car during hot weather), pets, small children, and other destructive forces. Magnetic fields have no effect on DVDs. The DVD specification recommends that discs be stored at a temperature between -20 to 50? C (-4 to 122 ? F) with less than 15 ?C (27 ?F) variation per hour, at relative humidity of 5% to 90%.
Coloring the outside edge of a DVD with a green marker (or any other color) makes no difference in video or audio quality. Data is read based on pit interference at 1/4 of the laser wavelength, a distance of less than 165 nanometers. A bit of dye that on average is more than 3 million times farther away is not going to affect anything.
Cleaning and repairing DVDs
If you notice problems when playing a disc, you may be able to correct them with a simple cleaning.
Do not use strong cleaners, abrasives, solvents, or acids.
With a soft, lint-free cloth, wipe gently in only a radial direction (a straight line between the hub and the rim). Since the data is arranged circularly on the disc, the micro scratches you create when cleaning the disc (or the nasty gouge you make with the dirt you didn't see on your cleaning cloth) will cross more error correction blocks and be less likely to cause unrecoverable errors).
Don't use canned or compressed air, which can be very cold and may thermally stress the disc.
For stubborn dirt or gummy adhesive, use water, water with mild soap, or isopropyl alcohol. As a last resort, try peanut oil. Let it sit for about a minute before wiping it off.
There are commercial products that clean discs and provide some protection from dust, fingerprints, and scratches. Cleaning products labeled for use on CDs work as well as those that say they are for DVDs.
If you continue to have problems after cleaning the disc, you may need to attempt to repair one or more scratches. Sometimes even hairline scratches can cause errors if they just happen to cover an entire ECC block. Examine the disc, keeping in mind that the laser reads from the bottom. There are essentially two methods of repairing scratches: 1) fill or coat the scratch with an optical material; 2) polish down the scratch. There are many commercial products that do one or both of these, or you may wish to buy polishing compounds or toothpaste and do it yourself. The trick is to polish out the scratch without causing new ones. A mess of small polishing scratches can cause more damage than a big scratch. As with cleaning, polish only in the radial direction.
Libraries, rental shops, and other venues that need to clean a lot discs may want to invest in a commercial polishing machine that can restore a disc to pristine condition after an amazing amount of abuse. Keep in mind that the data layer on a DVD is only half as deep as on a CD, so a DVD can only be re-polished about half as many times.
The problem is widely mentioned in the networld that the video will automatically exit when you are watching it (including myself) and it couldn’t continue to be played where the video exits. I really want to know what causes the problem. Is it due to the conversion problem of the software or the original video? As for the conversion tool, I use the free software: Videora iPod Converter. Later on I had a try on Pavtube DVD Ripper. Sometimes the problem comes up and sometimes not, same as using other software. just for the same video, when using different software, or trying different software to convert the some video, the same problem comes up from time to time.
So I want to ask the expert what causes the problem. Is it because of the software clash or the video conversion problem? Many people asked the similar questions but no one answered it to resolve the problem normally. Some people just say that some software is better than others. However, as far as I know, it seems that there is no the problem like this to come up. (I have been using the same software to convert the same format for the movies). I really don’t know what causes the problem.
Is it because of the software clash? Hope that it is discussed by all of you and can tell us what the cause is. Thanks in advance.
How to Restart a Frozen iPod nano,ipod classic ,ipod touch iPhone
Occasionally an iPod or iPhone may freeze or fail to respond to your commands. This can happen for a number of reasons and does not necessarily indicate a serious problem. Sometimes they just need a restart much like the way your computer needs a reset once in a while.
Restarting an iPod or iPhone is a simple procedure that will not erase any of your music, data files, or customized preferences.
" Dumb question. If the iPod is not responding and appears to be frozen, what do I do? " ~ Lloyd
1. Check that your hold switch is off by sliding the switch away from the headphone jack. The hold switch is located in the top corner of the iPod. If you see orange, then the iPod is locked. To unlock the iPod, slide the switch in the opposite position.
2. Press and hold the following combination of buttons buttons simultaneously for approximately 10 seconds to reset the iPod.
*iPod 1G to 3G (scroll & touch wheel iPods): "Menu" and "Play/Pause"
*iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select Center Button"
*iPhone & iPod Touch: "Menu" and "Sleep Button" (see image on right)
*Shuffle: Turn it off. Turn it on. Done.
If you have an iPod Mini or 4th gen iPod or higher, then you need to press the Menu and Select buttons. The Select button is the center button in the middle of the wheel.
For older iPods (1G - 3G) you'll need to press the Menu and Play buttons to restart.
Upon reset, your will see the iPod/iPhone name and the Apple logo. When this happens, you can let go - the iPhone/iPod is rebooting. If your battery is very low, you may have to attach your iPod/iPhone to a power source.
NERD NOTE: If you still can't get your iPod to restart, try placing it on a table or flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
3. The iPod name and the Apple logo will briefly appear upon a successful restart before advancing to the Main Menu.
4. If you have your iPod/iPhone connected to your computer and iTunes open, then your iPod/iPhone should mount and show up under "Devices" in the left iTunes sidebar. If your iPod/iPhone doesn't mount, please read this page: My iPod/iPhone Won't Mount or Update.
At last,more apps or converters pls refer to:http://www.pavtube.com
My biggest complaint about the iPhone and iPod Touch is the battery life. i always use pavtube to convert my video for enjoy,During heavy usage you can’t even get a full 3 hours out of it. The best thing you can do is know what to look out for. . .and hopefully this list will help.
10) Keep It On There really isn’t any reason turn it off at the end of the day. As long as it is in ’sleep mode’(without playing music) it turns all network activity off. The device actually uses a lot of the batter just to turn it on. . .even more than if you had just left it on.
9) Turn Sound Effects Off You can go into Settings -> General -> Sound Effects and turn it off. Or at least set it to either Speaker or Headphones. . .not Both(which it is by default).
Turn EQ Off You can go into Settings -> Music -> EQ and turn it off. This will use less resources to monitor the EQ.
7) Less Email Addresses You can go into Settings -> Mail and disable a few of your email accounts. The less email addresses your iPhone or iPod Touch has to check, the more battery life you will have. This is because of network activity usage.
7a) Check Email Less Often You can go into Settings -> Mail -> Auto-Check and set this to manual. . .or at least Every hour(as opposed to 15/30 minutes). Just like above, the your device has to connect to Wifi/Edge the longer your battery will last.
6) Set Auto-Lock You can go into Settings -> General -> Auto-Lock and set it to 1-3 minutes(I have mine set to 1). The longer your screen is turned on the more it uses the battery. Either do this or get used to putting it into ’sleep mode’ immediately after usage.
5) Turn BlueTooth Off You can either do this via Settings or in the BossPrefs application.
4) Keep Brightness Dim You can go into Settings -> Brightness and move the bar on the top toward the left. Go as far to the left as you can(without sacrificing quality). The less bright the screen has to be the longer your battery will last.
4a) Turn Auto-Brightness Off You can go into Settings -> Brightness and turn Auto-Brightness off. This will not only prevent the device from increasing the brightness level. It will also use less resources. . .since it doesn’t have to monitor anything.
3) Turn Edge Off Much like BlueTooth, you can do this from either Settings or the 3rd party application BossPrefs.
2) Turn SSH Off You can go into the application BossPrefs, Services, or the default SSH icon and turn this service on/off. This runs in the background when any network activity is available. This is one of the biggest reasons people who Jailbreak their iPhones and iPod Touches have very poor battery life.
1) Turn WiFi Off Even more than SSH, WiFi really uses your battery. Paired with MobileSafari browsing, your battery will not even last 3 hours. I normally just put the device into sleep mode, and it turns of WiFi automatically. But, when music is playing WiFi is on, and it will deplete your battery with the quickness.
This is a lot of things to monitor. . .but if you get into the habit of turning services on/off(much like turning off a light when you leave the room). . .you could go an extra 2-3 days between charging sessions.
Bonus At least once per month try and use all of the battery life in your iPhone and iPod Touch. The lower you get the battery level the better. Then recharge your device to 100%. This will ‘reset’ your battery to the best of it’s ability. The more you recharge your device, without letting the battery die completely, the lower your ‘battery capacity’ is. Doing this once per month(or even once per week) will keep your battery in tip top shape.
The ripping problem when compressing DVD I bought a DVD the day before yesterday, feeling it so classic. However, I would like to compress the DVD and convert it into *.rmvb files for sharing with friends on the Internet. Then the problems come up.
For ripping DVD, I use DVD Decrypter to help complete the conversion task. Mode->settings, file mode->none After finishing these steps, there are still multiple *.vob files.
The second DVD Open one of *.vob files and let it directly play on the player. The audio and video are out of sync. While playing DVD on the player, they keep sync.
Some time ago, a friend bought a DVD burner, and he wanted to copy a few classic DVD-video discs. However, the problem that DVD can not be copied successfully comes out when copying DVD with nero 7.0, so he asked for help.
In fact, it is known that not all the DVD can be copied simply. For the general DVD data discs, it is very easy to backup the information of DVD with Nero 7.0. Just following the step by step instruction, the copying task will be done. If you are still not very clear, please get more detailed information at http://www.nero.com/enu/support-nero7-tutorials.html But some DVD are encrypted and protected by means of CSS. At the moment, you have to do something for crack. Choosing free software or not is up to you, such as DVDFab HD, DVDShrink, and DVD43.
The passage is prepared for the beginners. Now, Take Pavtube DVD Copy as an example. There is not so much software that supports both copying and removing CSS while Pavtube DVD Copy is good choice, which can be valid for 5 times within the first month if you use trial version.
Operating Pavtube DVD Copy is very simple and easy. See the screenshot below.
If you just want to rip some chapter, just tick it and then it will be done. Want to copy the full disc? You can choose “Full Disc” mode to complete the copying task.
Here is the guide for how to copy DVD to a blank DVD. First make sure that you have installed DVD+/-RW. There are two steps during the copy process: first it will copy the DVD movie to a temporary folder on your computer, second copy the files in temporary folder to the blank DVD disc.
When the first copying process is done, eject the original DVD disc and insert a blank DVD disc, click "ok" on the pop up diallog box. Then it will start to burn the DVD movie to the blank DVD disc. Now you can enjoy your copied disc!
How to copy *.vob files on DVD to the hard disk and merge them together
When copying VOB files to the hard disk, due to CSS protection, generally the copied movies can not be played on the player and become the noisy sound, even more serious, the movies are not allowed to copy to the hard disk, namely, the instructions are not implemented While now, the protection has been cracked. If you still do not learn about it, you must know about it, as this is the basic concept.
1. Download DECSS This step is easy if you have read the instruction. It does not matter if containing too many files on DVD. We can merge them into a single one. Why do we still merge the files into a single one since it is too big to put in the disc? You know, the capability of the disc is about 640 MB, and even though you divide *.vob with 1GB capability into two parts with ripping tool, it still takes up too much space. Only merge all of the VOB files into a VOB file, we can save disc space and avoid missing *.vob files. Right?
DeCSS has already provided the function to merge *.vob files altogether into a file. Pay attention: choose the first 1 GB file as the starting to the final one and remember to exclude the unwanted ones and tick the “merge” option. Then it will be done!
2. Rip *.vob files Now, it is time to split *.vob files. This step is ready for putting them into CD-RM. We use Vob Splitter as the ripping tool to split the made super *.vob files into several small *.vob files with 600MB capability. It is so easy that you just need to open the super *.vob file and then Vob Splitter will start to help you split the file. It should be noted that Vob Splitte will take some time to cut VOB file and will retain the original large VOB file. If we deal with a 4 GB *.vob file, it must take up 8 GB space of hard drive. It is not recommended at this time to go to the implementation of other actions in case that the ripped *.vob files are out of sync.
Tips: The backup *.vob files should be played on the computer and I am not sure whether it can be compatible with players. (I have never had a try. ) In addition, if your original DVD is very poor, (bad scratches) or it is not good for the reading effects of DVD-ROM, it may not be watched. It is recommended that you can rebuild your hard drive to make it the best state before all the important operation.
Of course, if you want to reduce the trouble, and would rather spend more money on it, you can use the simple ways to complete it. Please read here: http://www.pavtube.com/dvd_copy/guide/ These are some skills purely and can not be used in the illegal piracy!
When the mp3 just come out a few years ago, people suddenly discovered that, with such a small device, carrying heavy machine CD and running everywhere are no longer needed.
Then people around take with all kinds of MP3, enjoying their favorite music. Today, the people's demands are not only limited to listening to music, thus, MP4 player is more and more popular, of course, For the video player, we must mention Apple's iPod players, by Apple Computer Inc. The excellent quality of the products wins the largest users group, although the price is a little higher compared with some other products. But loyal "Apple fans" are still keen on it. Recently, with the recommendation of my friends, I purchase Apple iPod, failing to resist the temptation and joining their ranks. Then the attendant problems are coming after having it. How can I put DVD video onto iPod for playback? What kind of conversion tools can help complete this task? Will you search for a larger amount of the information about software to find the most suitable one? I spent a few days, to the end, and collected several good products from the major forums. By using the trial version for each one, I am familiar with the main features of each product.
I did the test from several aspects of them and hope that everyone can choose the software that is suitable for you.
Comparison for the operability of the interface
One of the important factors that attract the iPod users is certainly the appearance and Apple products, with its simple but unique appearance attract a lot of support. When we use dvd to ipod converter software for conversion, It is for granted to hope it can also have the beautiful appearance same as iPod. Running the software, the first to enter our field of vision is the overall interface. For a good interface, we can gave it a very high scores at the first sight, and during the subsequent using process, we arre also in a relatively good mood. Many iPod users know little about the computer and such a complex parameter settings will make them brain fatigue. So the tools with the simple interface and easy steps are really more desirable.
Here I will offer some outstanding software in the field of audio and video, and you can choose one that you like.
Conclusion: overall, for the appearance, all the software has their unique design, and which one to choose is up to you. In my opinion, from the perspective of color, the styles for Movkit and Pavtube are the best.
Performance (conversion speed and stability)
When using conversion software, we often want efficient conversion speed. Converting a DVD files usually needs a lot of time. Usually from a one-hour DVD to MP4 format files it is about 30 minutes. If you have a lot of DVD to convert, you had better choose the software with fast speed. Otherwise, you will waste a lot of time on conversion, meanwhile, your computer will be stepped into the bundling process.
The test in this aspect took me a relatively long time, as the common DVD documents need an hour and a half for playback on average and the conversion time is around one hour.
After the comprehensive test, I discover several problems. First, if converting the whole DVD discs, the speed is more or less same. The time for total conversion and the source file are controlled in the ratio of 1:1. As for the personal settings, Xilisoft, Movkit, and Pavtube software, all can automatically detect your CPU style, and then choose your processing algorithms to increase the conversion speed. If you have a concert CD, and just only want to convert several pieces of favorite music onto your iPod, you will discover the conversion speed for the chapters with Pavtube is less up to a half than the whole, and I was shocked.
Output quality
Video effects: Most iPod users enjoy movies with it, so it is particularly important for video effects. For the top DVD conversion tool, the quality of the output video is the same as the original one without any loss so that we can experience the enjoyment for high-precision video, otherwise, not only your eyes will be hurt, but the frequent beat and mosaic images also will annoy you.
Audio quality: iPod is the most popular high-quality music output system around the world, so you can get the best music effects from it. Could you bear that a piece of good music becomes bad via conversion? I can not! Therefore, do not choose the converter that will damage your ears and brain. Among the software, except for super products, the other products all can customize the parameters such as the resolution, video / audio bit rate, and audio sample rate. Here we must to mention PQ DVD, on the interface, we can see clearly the slider for output quality, and output file size is shown too. Thus, it is very easy for us to balance the quality and size. Other products are also very excellent in this aspect, each has respective settings interface. The output quality values by the users, therefore, none of the products will be neglected here.
Stylish settings (advanced parameters) For some primary customers, the simple conversion function can fully meet their requirements, but for those who play music, film fans, the setting options are particularly important. Here, PQDVD sets up 6 tailoring, Xilisoft 4, and Pavtube also provide 5 tailoring, which is of great help for trimming the image. In addition, Pavtube supports playback effects such as brightness, contrast, the volume for voice and the thumbnail. Cucusoft supports the brightness filter (you don’t have to worry about the background light.) Movkit will have an adjust ion for the angle and the contrast, and Xilisoft supports both color migration and the migration subtitles so that you won’t have the trouble for blocked image. By the simple operation, we can solve such a problem. At the same time, Xilisoft and pavtube can also support the division for film size or time, giving us the control for iPod capacity. Cucusoft, PQDVD, and Pavtube all support the function of automatic shutdown after conversion.So you don’t have to wait in front of the computers until it finishes the conversion task. As long as you set the necessary settings, it will work automatically.
The comparison for price
Everyone would like to get most reward with least spending. Here is a list form for comparison. Pavtube Cucusoft:29$ Cucusoft:29.95$ PQ :39.95$ Super:43.95$ Xilisoft:29$ Movkit:29.95$
Pavtube DVD to iPod Converter, Xilisoft DVD to iPod Converter and Cucusoft DVD to iPod Converter are pretty good on the conversion speed and output, if I have to give an opinion.
Some PSP video conversion tools are free and now I share what I have used
The Sony PlayStation Portable (Sony PSP) has become a very popular handheld game platform. It is designed for gaming and viewing movies. All the major film studios including Disney, Warner Brothers, Paramount and Sony Pictures have published movies specifically for the Sony PSP.
The large handheld display combined with very good audio quality makes the Sony PSP an excellent choice when viewing movies on the go.
The Sony PSP can play many different audio file formats, including the most popular two—MP3 and WMA. Video files for your Sony PSP need to be in a MPEG-4 format. Sony uses a slightly altered version of the MPEG-4 format which includes its own header information.
It is easy to transfer home movies or videos from your camcorder or even to show that you've recorded on your Media Center PC to your Sony PSP. Some programs like Pavtube Video
Converter can convert and transfer video files from your PC to the Sony PSP, and the Pavtube DVD Ripper can perfectly help you rip the DVD to PSP.
When storing video on the card a strange file naming convention is used. All video files and thumbnails need to be stored in a folder called: /MP_ROOT/100MNV01.
Each video in this folder is represented by a data file and a thumbnail file called: M4V00001.MP4 and M4V00001.THM. The 00001 component of the file name is incremented for multiple videos.
The thumbnails are simple 160x120 JPEG images stored with the .THM extension. Note that the title of the video is stored in the header of the file.
Pavtube DVD Ripper is the best DVD ripper for you to choose among all DVD ripping software. This DVD ripping software can perfectly rip DVD movies with no loss of image & sound quality, and provide more powerful movie-editing functions than others, merging several chapters/titles into one file, trimming and cropping video, customizing parameter, setting effect you prefer, and capturing any impressive image from your DVD for saving as your collections with just a few clicks. Download this best DVD ripping software now and enjoy your DVD movies.
Pavtube DVD Ripper is easy-to-use and powerful DVD ripping software. The DVD ripper can convert DVD to various video and audio formats, ripping DVD to AVI, MPEG, MP4, MOV, 3GP, WMV, 3G2, WMA, MP3, etc.
System Requirements: Windows NT4.0 + SP6/2000/XP (Vista Compatible) 64MB Memory (128MB recommended) 512MB hard disc space or above Microsoft DirectX 9.0 or above Quick Time file supported Quick Time 6.0 or above Windows Media Player 9.0 or above DVD ROM
Version: V1.0 Size:5.25 MB Supported OS: NT 2000 XP Vista Only $35 Download address:http://www.pavtube.com/dvd_ripper/
Welcome your testing,thanks
Main FeaturesExtremely Easy to Use
This DVD movie ripper is so simple that even a beginner can also get video or audio from DVD with a few clicks.
Excellent Output Quality
Give you the excellent images and high quality sound.
Super Ripping Speed
The DVD movie ripper fully supports Intel Pentium D Dual-Core Processor and AMD Athlon 64 X 2 Dual-Core Processor; support multi-threading with no limitation in speed; detect your CPU model automatically, offer you the quickest ripping speed that beyond your imagination.
Rip DVD to Various Video Formats
Pavtube DVD Ripper can directly rip DVD for playback on all popular portable video/audio players. Rip DVD to iPod Video; Rip DVD to PSP; Rip DVD to PS3; Rip DVD to iPhone; Rip DVD to Apple TV (MP4, M4A, MP3); Rip DVD to Zune (WMV, WMA); Rip DVD to Archos MP4 Player (MP4); Rip DVD to Creative Zen (WMV, MP3, WMA); Rip DVD to iPod nano and iPod shuffle (MP3); Rip DVD to Pocket PC (WMV); Rip DVD to Nokia; Rip DVD to Motorola Phone (3GP) and so on.
Customize Output File
Pavtube DVD Ripper features the ability of customizing, editing, and saving the profile for later use more conveniently. You can get wanted time segment and image region. The function of cutting off the black edges is provided.
Merging and Splitting
It can rip DVD movies into some titles and chapters. You can choose one part or several as required to convert. Moreover, merging multiple files into a single one is possible absolutely. So merging or splitting is up to you!
Snapshot Impressive Images Capture the beautiful image with one click when previewing the DVD movie and save as JPEG or BMP.
Batch Conversion Specify the max processes and select more than one file at a time. All Encoders/Decoders Built in You will have no trouble in installing extra codec for conversion.
Guide for how to convert AVI, WMV, MPEG,RM,ect to zune
This guide will tell you how to convert AVI, WMV, MPEG, RM, Divx, MOV,XviD, , RMVB, ASF, MPG to Zune.
Notice:
Before convert convert AVI, WMV, MPEG, RM, Divx, MOV,XviD, Youtube, RMVB, DVR-MS, FLV, ASF, MPG to Zune, let's check the format limitations which the Zune plays.
* Zune Video: unprotected MP4 (MPEG-4), H.264, WMV up to 320x240 pixel, 1.5Mbps video bitrate, 30fps, 192Kbps audio, 44.1kHz. * Zune Audio: MP3, WMA, AAC up to 320Kbps, 48kHz sample rate.
Pavtube Video to Zune Converter is the software especially for playback on Zune player to convert the popular formats to the formats Zune supported. It allows you to edit the videos by trimming and crop function, merge the videos into a large and single one, and capture pictures from the videos for storage on your own PC. Its customized design meets the requirements of the Zune-lovers pursuing the practicality and the specialty. In addition, the product provides the advanced settings like bit rate, frame rate, video size, etc. for those who wish to make more control to the video. Moreover, friendly interface makes you operate it expertly for the first time without the troublesome process.
1. Download the latest versions from office website: http://www.pavtube.com/video_to_zune/,and run Pavtube Video to Zune Converter and you will see its main interface.
2. Import the videos to the file list by clicking Add button. Then you can edit the list using the buttons under the list.
3. Open the profile drop-down bar to select the target conversion format for playback on Zune player. After this, please open output drop-down bar to specify where to save your converted files.
4. Previewing the video is a good choice for you. Under the preview window, you can click the button to capture the still pictures to save on your PC for enriching the picture collection.
5. Edit the videos Effect: Adjust brightness, contrast, volume for video and audio. In addition, you can tick to modify the image effects in flipping and deinterlace.
Trim:
Drag the slider or set the number manually to choose the starting time and the ending time. You can gain the selected time phase for enjoyment.
Crop: Open the drop-down list to select which edges to be cut off. Drag the frame-mark to specify the region you want.
6. For better effects, clicking setting button can satisfy you. Tick to select which part to modify, video or audio. One click for the parameter can make the triangle button appear. Hit it then amend the parameter.
7. Click the merge button to create a single file. If you wish to reduce the trouble of resetting, hit apply to all button.
8. Start to run the program by clicking the button. After this, you can confirm the converted file on your PC by hitting open button. Here all the preparing work is finished. Then you can transfer the converted file to your Zune player for enjoyment.
Guide for how to convert AVI, WMV, MPEG,RM,ect to zune
This guide will tell you how to convert AVI, WMV, MPEG, RM, Divx, MOV,XviD, , RMVB, ASF, MPG to Zune.
Notice:
Before convert convert AVI, WMV, MPEG, RM, Divx, MOV,XviD, Youtube, RMVB, DVR-MS, FLV, ASF, MPG to Zune, let's check the format limitations which the Zune plays.
* Zune Video: unprotected MP4 (MPEG-4), H.264, WMV up to 320x240 pixel, 1.5Mbps video bitrate, 30fps, 192Kbps audio, 44.1kHz. * Zune Audio: MP3, WMA, AAC up to 320Kbps, 48kHz sample rate.
Pavtube Video to Zune Converter is the software especially for playback on Zune player to convert the popular formats to the formats Zune supported. It allows you to edit the videos by trimming and crop function, merge the videos into a large and single one, and capture pictures from the videos for storage on your own PC. Its customized design meets the requirements of the Zune-lovers pursuing the practicality and the specialty. In addition, the product provides the advanced settings like bit rate, frame rate, video size, etc. for those who wish to make more control to the video. Moreover, friendly interface makes you operate it expertly for the first time without the troublesome process.
1. Download the latest versions from office website: http://www.pavtube.com/video_to_zune/,and run Pavtube Video to Zune Converter and you will see its main interface.
2. Import the videos to the file list by clicking Add button. Then you can edit the list using the buttons under the list.
3. Open the profile drop-down bar to select the target conversion format for playback on Zune player. After this, please open output drop-down bar to specify where to save your converted files.
4. Previewing the video is a good choice for you. Under the preview window, you can click the button to capture the still pictures to save on your PC for enriching the picture collection.
5. Edit the videos Effect: Adjust brightness, contrast, volume for video and audio. In addition, you can tick to modify the image effects in flipping and deinterlace.
Trim:
Drag the slider or set the number manually to choose the starting time and the ending time. You can gain the selected time phase for enjoyment.
Crop: Open the drop-down list to select which edges to be cut off. Drag the frame-mark to specify the region you want.
6. For better effects, clicking setting button can satisfy you. Tick to select which part to modify, video or audio. One click for the parameter can make the triangle button appear. Hit it then amend the parameter.
7. Click the merge button to create a single file. If you wish to reduce the trouble of resetting, hit apply to all button.
8. Start to run the program by clicking the button. After this, you can confirm the converted file on your PC by hitting open button. Here all the preparing work is finished. Then you can transfer the converted file to your Zune player for enjoyment.
Forum 
Show Posts
Turn EQ Off
